Skip to content

SimpCharge/EVS-Charge

$80.00

The SimpCharge/EVS-Charge EVSE Controller interfaces with offboard Level 1 and Level 2 J1772/Mennekes AC chargers to allow your EV conversion to charge at public charging stations.

The SimpCharge/EVS-Charge is compatible with the Vero BMS V2.

Questions? Email sales@veroelectric.com

Categories: , ,

NOTE: The SimpCharge and EVS-Charge are functionally identical, with a slightly different pinout. Please refer to the documentation before wiring.

Included in your purchase:
– SimpCharge/EVS-Charge EVSE Charge Controller
– 8-pin male MOLEX connector with pins
– 1k ohm resistor for J1772 proximity plug (some J1772 inlets have this preinstalled)

Documentation: CLICK HERE

Standalone Functions:

  1. Detect Plug (Type 1 or 2) based on the Proximity Signal – Dedicated 12V output when plug is inserted, EVSE does not need to be powered ON
  2. Detect Active EVSE based on the Pilot Signal – Dedicated 12V output when Pilot Signal is ACTIVE
  3. Switch on EVSE with simple 12V signal – Can come from any 12V source; A BMS signal (same as a charger activate signal) or a simple 12V switch

 

Additional Functions with the SimpBMS or Vero BMS:

  1. Detect available AC current from EVSE – Pilot Signal gets conditioned to be read by the BMS, which allows for the automatic limiting of CANbus-based chargers.

Related products